For your amusement, my first support unit, a company of 120MM mortars ready to lob hot steel onto the heads of the Hitlerite invaders! In Flames of War terms, 130 points for 6 tubes (Red Bear), + 20 points for observers and trucks. AT 3, FP 3+, range: 56".
I've decided to dig the battery in, making for a more interesting visual. The process wasn't hard, build the timber frame and pile up the gravel in front of it layer by layer.
The gun crews I patterned on the early-mid war
uniforms, using Polly S dust as a base, highlighted with Polly-S mud. Fielding a Soviet army on a budget, these will work for early and mid-war armies, and will pass for later-war as well. The mortar tubes were primed in Krylon camo-green, black-washed with painters oils, then highlighted with German panzer olive.
For the timber-cribbing I used stir-sticks from a local coffee shop. I split them width-wise into three, and tore them into the lengths I needed. After super-gluing them into place, I coated them with a GW wood brown, then black-washed them in the joints, recesses, and seams to give it a more aged look.
I'm still not quite satisfied with the soil effects, and will be experimenting with finer grain materials, colors, etc. Still, they should catch a few eyes on the table.
I look forward to ranging in with them, and putting some poor infantry platoon out of my misery!
2 comments:
They look good, what are you dissatisfied with? The grass is probably too sparse is all I'd say.
Love them, but shouldn't they be facing the short edge?
Cheers, Mike
Post a Comment